RANBUILD STABLES

Enclosed Aussie Stables

The centre section in all Aussie stables is a clear span allowing unobstructed access.  You can drive right through the building making it easier to clean and maintain.

Large Aussie Stables

AU 02. Another example of a longer Aussie Stable fitted with individual wall shutter for each stall. This one also has wind driven roof ventilators to assist air movement.

Also notice the wide eaves overhang on the annexes allowing air flow beneath the roof cladding to reduce heat and condensation.

There is almost no limit to the size of Ranbuild stables. The only constraints are the standard bay and annex dimensions of 3.8m x 3.8m.

Inside Aussie Stables

AU 03.  Ranbuild Aussie Stables not only look good fom the outside, they look just as good inside as well.

The clear, clean lines of pre-galvanised cold formed steel combined with Ranbuild's true and tested connections leaves nothing to be desired.

With the combination of Durastall(TM) panels and partitions, your stables can be a show place as well as a safe and secure home for your valuable horses.

American Stables

AM 01. American stables have a stepped roof line where the annexe joins the centre section.

The stepped roof provides additional space in the centre section for a loft or mezzanine floor.

The American Stable at right has an awning along one side protecting the two-piece day-yard doors from sun or rain.

American Stables

Like the Aussie stable building, the American stables are made in 3.8m bays. Any number of bays may be ordered now or in the future.

Inside American Stables

AM 03. This photo shows the stepped roof section from the inside. The area between the centre and annexe roofs may be steel or translucent cladding, or adjustable louvres. The distance between the two roofs may be increased to provide additional storage area if a loft or mezzanine floor is added.

American stables may also be ordered with bird-proofed wide eaves overhang on the annexes. The unique design allows air flow beneath the roof cladding without creating a draught at animal level.

All Ranbuild stables have the option of steel or timber clad partition walls. Use steel clad partitions to make a feed room or tack room. Use plywood or hardwood panels to line and divide the livestock areas. You simply choose what you want.

This could be yours

There are many more buildings like these and your Ranbuild Team are ready to help you choose one from the large range of standard sizes, models and colours.

To find out more about Durastall(TM) stable panels and partitions, go to our Stalls page.

In addition to the above range of stables, Ranbuild also offer a wide variety of horse shelters and riding arenas. For information on Ranbuild's equine shelters and covers, go to our Shelters page.

Key Benefits

	Ranbuild Stables and Barns are based on standard designs so engineering costs and production times are only a fraction of a custom made building.
	Framing components are cold rolled galvanised steel sections that bolt together on site with high tensile zinc coated fasteners.
	There are no welded trusses or painted structural components that are subject to corrosion or require periodic maintenance.
	All fabricated (welded) steel stall components are hot dip galvanised after manufacture to maintain their integrity and anti-rusting properties.
	External cladding is high tensile zinc coated corrugated steel, finished in a choice of twenty different COLORBOND® colours.
	Ranbuild Stables and Barns can be engineer certified at a minimum fee for your building approval application.

Pricing